Roofing in Fort Worth, TX
An independent look at what a replacement really costs ($8.5K–$15K) and which weather loads drive wear here — built from 1991-2020 climate records and Texas code requirements, with no contractor paying to appear.
Tarrant County, Texas. Planning figures — not a quote.
What a roof costs in Fort Worth
A full tear-off and replacement in Fort Worth runs $8,500–$15,000 for architectural asphalt shingles on a 2,000–2,500 sq ft home. Such a footprint carries roughly 22–28 squares of actual roof surface once pitch and waste are counted, which puts the same job at about $337–$595 per square — the unit a contractor's estimate will be built in.
| Material | Installed range | Service life | Best suited to |
|---|---|---|---|
| Architectural Shingles | $8,500 – $15,000 | 25–30 years | Most Fort Worth homes |
| Impact-Resistant (Class 4) | $12,000 – $19,000 | 30+ years | Hail protection + insurance savings |
| Standing Seam Metal | $26,000 – $40,000 | 40–70 years | Premium, long-term value |
On what is and isn’t included
The $8,500–$15,000 band covers tear-off, underlayment, the new covering, disposal, and labor on a 2,000–2,500 sq ft footprint. It excludes deck replacement — on a Fort Worth roof at this price, budget a further $510–$1,800 if the sheathing is soft.
What moves the number in Fort Worth
The $8,500–$15,000 band above assumes a straightforward roof. These are the items that move a Fort Worth quote off it, priced against that same range rather than a national percentage.
| Cost driver | Effect | Why it costs what it does |
|---|---|---|
| Steep pitch (7:12 and above) | +$1,292–$2,232 | Staging, slower coursing, and fall-protection time. On a $11,750 Fort Worth roof that is the largest single geometry premium. |
| Removing a second layer | +$765–$2,400 | Tear-off and disposal roughly double. Ask whether the $8,500–$15,000 quoted assumed one layer. |
| Sheathing replacement | +$510–$1,800 | The most common change order, priced per sheet once the deck is open. At $11,750 for the roof itself, an undisclosed sheet rate is where a Fort Worth quote quietly grows. |
| Two-story access | +$705–$1,175 | Longer material handling on every course, worth roughly $940 on this range. |
| Class 4 impact-resistant upgrade | +$3,500–$4,000 | Taken from the Fort Worth table above. Whether a carrier credit offsets that $3,500 depends on your own policy — price it, do not assume it. |
| Standing seam metal instead of asphalt | +$17,500–$25,000 | Roughly double the service life, so the comparison is $435 a year against $585 a year, not the sticker price. |
| Ventilation correction | +$235–$588 | Balancing intake to exhaust. At 92 days a year above 90°F and a 94°F summer average, this is the cheapest life-extension on the list. |
What the weather does to roofs in Fort Worth
Across the 1991-2020 climate normals, Fort Worth averages summer highs averaging 94°F, 36 in of precipitation a year, and 92 days a year above 90°F — the loads a replacement here is bought to survive.
The dominant stressor is thermal cycling and UV. Fort Worth’s 92 days a year at or above 90°F sits in the 90th percentile among the 1,037 cities covered here. 92 days a year above 90°F is enough to drive the asphalt-aging clock without dominating it. Ventilation balance still pays for itself here; a reflective or heavier-mat shingle is a judgement call rather than an obvious buy.
Source: NOAA 1991-2020 U.S. Climate Normals, nearest reporting station (6 mi from Fort Worth). Percentiles are measured against the 1,037 cities in this guide.
Where this guide covers in Fort Worth
Westover Hills
Built 1940s–1960s
An incorporated town within Fort Worth, Westover Hills features stately ranch homes on large lots with mature landscaping. Many homes retain original mid-century architecture with hip roofs that require more material per square foot. Tree canopy coverage is significant, and fallen limbs during storms are a common source of roof damage. Premium materials are expected in this affluent enclave.
Tanglewood
Built 1960s–1980s
One of Fort Worth's most desirable family neighborhoods, Tanglewood offers solid mid-century construction with brick exteriors and traditional rooflines. Most homes are 2,000-3,500 sq ft with standard hip or gable roofs. Many original roofs have been replaced at least once, and homeowners here typically invest in architectural shingles or impact-resistant upgrades for insurance savings.
Fairmount / Southside
Built 1900s–1920s
Fort Worth's premier historic district features beautifully restored craftsman bungalows and Victorian homes. The Historic and Cultural Landmarks Commission oversees exterior modifications, requiring period-appropriate materials and colors. Steep roof pitches, decorative gables, and complex rooflines increase both material and labor costs. Contractors must have experience with historic preservation standards.
Alliance / North Fort Worth
Built 2000s–Present
The Alliance corridor is Fort Worth's fastest-growing area, with master-planned communities featuring modern construction and builder-grade roofing. Homes built in the early 2000s are now reaching their first replacement cycle. HOA requirements vary by community but generally require architectural review. New construction uses current building codes, making re-roofing straightforward.
TCU Area
Built 1940s–1970s
The neighborhoods surrounding Texas Christian University offer charming mid-century homes popular with families and faculty. Smaller lot sizes and older construction mean roofing projects must account for aging decking and potential structural updates. Many homes feature a mix of original and renovated sections with different roofing ages, requiring careful assessment before full replacement.
ZIP codes
Fort Worth spans Tarrant County, and this guide covers the 56 ZIP codes carrying a Fort Worth mailing address.
- 76101
- 76102
- 76103
- 76104
- 76105
- 76106
- 76107
- 76108
- 76109
- 76110
- 76111
- 76112
- 76113
- 76114
- 76115
- 76116
- 76118
- 76119
- 76120
- 76121
- 76122
- 76123
- 76124
- 76126
- 76129
- 76130
- 76131
- 76132
- 76133
- 76134
- 76135
- 76136
- 76137
- 76140
- 76147
- 76148
- 76150
- 76155
- 76161
- 76162
- 76163
- 76164
- 76166
- 76177
- 76179
- 76181
- 76185
- 76190
- 76191
- 76192
- 76193
- 76195
- 76196
- 76197
- 76198
- 76199
Closest cities in this guide
Straight-line distance from Fort Worth, nearest first.
Fort Worth roofing questions
How much does a new roof cost in Fort Worth, TX?
Architectural asphalt shingles on a 2,000–2,500 sq ft home in Fort Worth run $8,500–$15,000 installed, or about $337–$595 per roofing square. Premium assemblies reach $26,000 – $40,000.
What wears out roofs fastest in Fort Worth?
Thermal cycling and UV. Fort Worth records 92 days a year at 90°F or above, which is the 90th percentile among the 1,037 cities covered here. 92 days a year above 90°F is enough to drive the asphalt-aging clock without dominating it. Ventilation balance still pays for itself here; a reflective or heavier-mat shingle is a judgement call rather than an obvious buy.
Does this guide cover areas near Fort Worth?
Yes — the closest are Arlington (13 mi), Colleyville (14 mi), and Keller (14 mi), each researched separately. Comparing them is worth a minute: a contractor working out of Arlington will quote Fort Worth too, and the two markets do not always price the same.
Compare three local quotes
The ranges on this page are for planning. The only way to know your number is a measured scope from a contractor who has been on the roof. We will pass your details to vetted local companies — no cost, no obligation.