Roofing in Converse, TX

An independent look at what a replacement really costs ($7.0K–$13K) and which weather loads drive wear here — built from 1991-2020 climate records and Texas code requirements, with no contractor paying to appear.

Converse at a glance TX·2026
Replacement range $7.0K–$13Karchitectural shingles, 2,000–2,500 sq ft
Cost per square $278–$51622–28 squares of roof area
Climate load 93°F summer avg35 in rain

Bexar County, Texas. Planning figures — not a quote.

Storm front over a residential street

What a roof costs in Converse

A full tear-off and replacement in Converse runs $7,000–$13,000 for architectural asphalt shingles on a 2,000–2,500 sq ft home. Such a footprint carries roughly 22–28 squares of actual roof surface once pitch and waste are counted, which puts the same job at about $278–$516 per square — the unit a contractor's estimate will be built in.

Within Texas, it runs 11% lower than the $11,250 median across the 83 Texas cities covered here.

Installed cost by roof covering — Converse, TX, 2026
MaterialInstalled range Service lifeBest suited to
3-Tab Asphalt $5,500 – $8,500 15–20 years Budget-conscious homeowners
Architectural Shingles $7,000 – $13,000 25–30 years Most Converse homes
Impact-Resistant (Class 4) $10,000 – $16,500 30+ years Hail protection + insurance savings
Corrugated Metal $12,000 – $19,000 40–60 years Rural and ranch-style homes
Standing Seam Metal $20,000 – $34,000 40–70 years Premium, long-term value
Tile $24,000 – $38,000 50–75 years Mediterranean & Spanish styles

On what is and isn’t included

The $7,000–$13,000 band covers tear-off, underlayment, the new covering, disposal, and labor on a 2,000–2,500 sq ft footprint. It excludes deck replacement — on a Converse roof at this price, budget a further $420–$1,560 if the sheathing is soft.

What each roof costs per year in Converse
$200 $525 $850 Corrugated Metal $310 40–60 yr Architectural Shingles $364 25–30 yr 3-Tab Asphalt $400 15–20 yr Standing Seam Metal $491 40–70 yr Tile $496 50–75 yr

Installed cost divided by service life, using Converse’s own figures. Corrugated Metal works out cheapest per year at about $310 — even though it is not the cheapest to buy. The bar shows best case to worst case; the dot is the midpoint. All of it assumes the roof reaches its rated life, which depends on the installation more than the product.

What moves the number in Converse

The $7,000–$13,000 band above assumes a straightforward roof. These are the items that move a Converse quote off it, priced against that same range rather than a national percentage.

Adjustments to the Converse replacement range
Cost driverEffect Why it costs what it does
Steep pitch (7:12 and above) +$1,100–$1,900 Staging, slower coursing, and fall-protection time. On a $10,000 Converse roof that is the largest single geometry premium.
Removing a second layer +$630–$2,080 Tear-off and disposal roughly double. Ask whether the $7,000–$13,000 quoted assumed one layer.
Sheathing replacement +$420–$1,560 The most common change order, priced per sheet once the deck is open. At $10,000 for the roof itself, an undisclosed sheet rate is where a Converse quote quietly grows.
Two-story access +$600–$1,000 Longer material handling on every course, worth roughly $800 on this range.
Class 4 impact-resistant upgrade +$3,000–$3,500 Taken from the Converse table above. Whether a carrier credit offsets that $3,000 depends on your own policy — price it, do not assume it.
Standing seam metal instead of asphalt +$13,000–$21,000 Roughly double the service life, so the comparison is $370 a year against $460 a year, not the sticker price.
Ventilation correction +$200–$500 Balancing intake to exhaust. At 95 days a year above 90°F and a 93°F summer average, this is the cheapest life-extension on the list.

What the weather does to roofs in Converse

Across the 1991-2020 climate normals, Converse averages summer highs averaging 93°F, 35 in of precipitation a year, and 95 days a year above 90°F — the loads a replacement here is bought to survive.

The dominant stressor is thermal cycling and UV. Converse’s 95 days a year at or above 90°F sits in the 91st percentile among the 1,037 cities covered here. 95 days a year above 90°F is enough to drive the asphalt-aging clock without dominating it. Ventilation balance still pays for itself here; a reflective or heavier-mat shingle is a judgement call rather than an obvious buy.

93°F
Avg summer high
35 in
Annual precipitation
95
Days/yr 90°F+
10
Days/yr 1 in+ rain
Perforated soffit panels under a roof eave overhang seen from below
This is the intake half. Adding exhaust without intake short-circuits the airflow and can make an attic hotter, not cooler.

Source: NOAA 1991-2020 U.S. Climate Normals, nearest reporting station (10 mi from Converse). Percentiles are measured against the 1,037 cities in this guide.

Where this guide covers in Converse

Country View

Built 1990s–2000s

Established family neighborhood with traditional single-story and two-story homes. Brick and siding exteriors with standard architectural shingle roofs. Many homes are approaching the 20-25 year replacement window. Affordable price points make this area popular for first-time homeowners investing in roof upgrades.

Woodbridge

Built 2010s–Present

Newer master-planned community with modern Texas suburban architecture. Homes feature updated building codes and newer roofing materials. Most roofs are still under manufacturer warranty, but hail damage claims are common. HOA requires architectural approval for any modifications including material and color changes.

Converse North

Built 2000s–2010s

Growing area along FM 1516 with a mix of mid-range homes. Traditional Texas ranch and two-story layouts with brick exteriors predominate. The area has experienced rapid development, and many early builds are now due for their first roof assessment. Competitive contractor pricing due to project density.

Old Converse

Built 1970s–1990s

The original residential core of Converse featuring smaller ranch-style homes on modest lots. Older construction may require decking inspection during re-roofing. Some homes have been updated while others retain original materials. Full structural assessment recommended for pre-1985 builds.

Retama Springs

Built 2015–Present

One of Converse's newest developments featuring energy-efficient homes with modern design elements. Builder-grade roofing materials are standard, and most are still under warranty. The newer construction means tighter building envelopes that require proper attic ventilation to prevent moisture issues.

ZIP codes

Converse spans Bexar County, and this guide covers the 1 ZIP code carrying a Converse mailing address.

  • 78109

Closest cities in this guide

Straight-line distance from Converse, nearest first.

Converse roofing questions

How much does a new roof cost in Converse, TX?

Architectural asphalt shingles on a 2,000–2,500 sq ft home in Converse run $7,000–$13,000 installed, or about $278–$516 per roofing square. Three-tab shingles start lower at $5,500 – $8,500. Premium assemblies reach $20,000 – $34,000.

What wears out roofs fastest in Converse?

Thermal cycling and UV. Converse records 95 days a year at 90°F or above, which is the 91st percentile among the 1,037 cities covered here. 95 days a year above 90°F is enough to drive the asphalt-aging clock without dominating it. Ventilation balance still pays for itself here; a reflective or heavier-mat shingle is a judgement call rather than an obvious buy.

Does this guide cover areas near Converse?

Yes — the closest are Universal City (3 mi), Live Oak (4 mi), and Schertz (4 mi), each researched separately. Comparing them is worth a minute: a contractor working out of Universal City will quote Converse too, and the two markets do not always price the same.

Compare three local quotes

The ranges on this page are for planning. The only way to know your number is a measured scope from a contractor who has been on the roof. We will pass your details to vetted local companies — no cost, no obligation.