Roofing in Redmond, WA
An independent look at what a replacement really costs ($12K–$25K), which weather loads drive wear here, and how the local permit process works — built from 1991-2020 climate records and Washington code requirements, with no contractor paying to appear.
King County, Washington. Planning figures — not a quote.
What a roof costs in Redmond
A full tear-off and replacement in Redmond runs $11,900–$25,000 for architectural asphalt shingles on a 2,000–2,500 sq ft home. Such a footprint carries roughly 22–28 squares of actual roof surface once pitch and waste are counted, which puts the same job at about $472–$992 per square — the unit a contractor's estimate will be built in.
That midpoint sits 8% above the $17,100 median across the 935 cities researched on this basis, placing Redmond in the 77th percentile for asphalt replacement cost.
| Material | Installed range | Service life | Best suited to |
|---|---|---|---|
| 3-Tab Shingles | $9,400 – $21,000 | 15–22 years | Lowest upfront cost for straightforward rooflines and short hold periods. |
| Architectural Shingles | $11,900 – $25,000 | 24–32 years | Most common replacement baseline balancing performance and budget. |
| Impact-Resistant Class 4 | $14,000 – $31,100 | 30–40 years | Storm and hail resilience with potential insurance value in many counties. |
| Exposed-Fastener Metal | $16,000 – $39,600 | 30–45 years | Durability-forward option for lower maintenance in wind-prone markets. |
| Standing Seam Metal | $18,500 – $46,600 | 40–60 years | High-performance option for wind-driven rain and long lifecycle value. |
| Premium Synthetic/Slate | $22,600 – $58,900 | 45–80 years | Premium homes and historic-style architecture seeking long service life. |
On what is and isn’t included
The $11,900–$25,000 band covers tear-off, underlayment, the new covering, disposal, and labor on a 2,000–2,500 sq ft footprint. It excludes deck replacement — on a Redmond roof at this price, budget a further $714–$3,000 if the sheathing is soft.
Installed cost divided by service life, using Redmond’s own figures. Impact-Resistant Class 4 works out cheapest per year at about $644 — even though it is not the cheapest to buy. The bar shows best case to worst case; the dot is the midpoint. All of it assumes the roof reaches its rated life, which depends on the installation more than the product.
Each tick is one of the 935 cities researched on the same basis. Redmond sits at the 77th percentile.
What moves the number in Redmond
The $11,900–$25,000 band above assumes a straightforward roof. These are the items that move a Redmond quote off it, priced against that same range rather than a national percentage.
| Cost driver | Effect | Why it costs what it does |
|---|---|---|
| Steep pitch (7:12 and above) | +$2,030–$3,506 | Staging, slower coursing, and fall-protection time. On a $18,450 Redmond roof that is the largest single geometry premium. |
| Removing a second layer | +$1,071–$4,000 | Tear-off and disposal roughly double. Ask whether the $11,900–$25,000 quoted assumed one layer. |
| Sheathing replacement | +$714–$3,000 | The most common change order, priced per sheet once the deck is open. At $18,450 for the roof itself, an undisclosed sheet rate is where a Redmond quote quietly grows. |
| Two-story access | +$1,107–$1,845 | Longer material handling on every course, worth roughly $1,476 on this range. |
| Class 4 impact-resistant upgrade | +$2,100–$6,100 | Taken from the Redmond table above. Whether a carrier credit offsets that $2,100 depends on your own policy — price it, do not assume it. |
| Standing seam metal instead of asphalt | +$6,600–$21,600 | Roughly double the service life, so the comparison is $683 a year against $501 a year, not the sticker price. |
What the weather does to roofs in Redmond
Across the 1991-2020 climate normals, Redmond averages summer highs averaging 74°F, 36 in of precipitation a year, and 1 days a year above 90°F — the loads a replacement here is bought to survive.
No single reading puts Redmond in the punishing tail of any category — 1 days above 90°F (1st percentile), 36 in of rain (36th), and 21 freezing days (24th) against the 1,037 cities here. Read that as permission to stop shopping for a product that solves a problem Redmond does not have, and to spend the difference on the crew doing the work.
Source: NOAA 1991-2020 U.S. Climate Normals, nearest reporting station (6 mi from Redmond). Percentiles are measured against the 1,037 cities in this guide.
Permits and code in Redmond
Permits and code
Reroof permits in Redmond are issued by City of Redmond Building Department, and permit plus inspection fees typically land in the $180–$650 band.
Roofing work is generally administered under state-adopted residential code frameworks with wildfire/rain or seismic-related local amendments.
Confirm in writing that City of Redmond Building Department is pulling the permit and that the fee is inside the quote — an unpermitted roof surfaces later, at a sale or a claim.
What matters at inspection here
Driven by Redmond’s measured climate
- Deck condition and fastener holding. With no single climate hazard dominating in Redmond, sheathing that will not hold a nail is the most likely reason a scope changes mid-job.
Where this guide covers in Redmond
ZIP codes
Redmond spans King County, and this guide covers the 3 ZIP codes carrying a Redmond mailing address.
- 98052
- 98053
- 98073
Closest cities in this guide
Straight-line distance from Redmond, nearest first.
Redmond roofing questions
How much does a new roof cost in Redmond, WA?
Architectural asphalt shingles on a 2,000–2,500 sq ft home in Redmond run $11,900–$25,000 installed, or about $472–$992 per roofing square. Three-tab shingles start lower at $9,400 - $21,000. Premium assemblies reach $18,500 - $46,600. The midpoint is 8% above the median across the 935 cities researched on the same basis.
What wears out roofs fastest in Redmond?
No single hazard dominates. Redmond averages 74°F summer highs and 36 in of precipitation a year, none of which is extreme by national standards. Installation quality, not product upgrades, is what decides service life here.
Do I need a permit to replace a roof in Redmond?
Most full tear-offs require a permit and at least one inspection, handled by City of Redmond Building Department. Budget $180–$650 for permit and inspection fees. Get it in writing that the permit is pulled and the fee sits inside the quote; in Redmond an unpermitted roof tends to surface at a sale or a claim, years later.
Does this guide cover areas near Redmond?
Yes — the closest are Kirkland (4 mi), Sammamish (6 mi), and Bellevue (6 mi), each researched separately. Comparing them is worth a minute: a contractor working out of Kirkland will quote Redmond too, and the two markets do not always price the same.
Compare three local quotes
The ranges on this page are for planning. The only way to know your number is a measured scope from a contractor who has been on the roof. We will pass your details to vetted local companies — no cost, no obligation.