Roofing in Binghamton, NY
An independent look at what a replacement really costs ($12K–$26K), which weather loads drive wear here, and how the local permit process works — built from 1991-2020 climate records and New York code requirements, with no contractor paying to appear.
Broome County, New York. Planning figures — not a quote.
What a roof costs in Binghamton
A full tear-off and replacement in Binghamton runs $12,500–$26,400 for architectural asphalt shingles on a 2,000–2,500 sq ft home. Such a footprint carries roughly 22–28 squares of actual roof surface once pitch and waste are counted, which puts the same job at about $496–$1,048 per square — the unit a contractor's estimate will be built in.
That midpoint sits 14% above the $17,100 median across the 935 cities researched on this basis, placing Binghamton in the 93rd percentile for asphalt replacement cost.
| Material | Installed range | Service life | Best suited to |
|---|---|---|---|
| 3-Tab Shingles | $9,900 – $22,200 | 15–22 years | Lowest upfront cost for straightforward rooflines and short hold periods. |
| Architectural Shingles | $12,500 – $26,400 | 24–32 years | Most common replacement baseline balancing performance and budget. |
| Impact-Resistant Class 4 | $14,800 – $32,700 | 30–40 years | Storm and hail resilience with potential insurance value in many counties. |
| Exposed-Fastener Metal | $16,800 – $41,700 | 30–45 years | Durability-forward option for lower maintenance in wind-prone markets. |
| Standing Seam Metal | $19,400 – $49,100 | 40–60 years | High-performance option for wind-driven rain and long lifecycle value. |
| Premium Synthetic/Slate | $23,800 – $62,000 | 45–80 years | Premium homes and historic-style architecture seeking long service life. |
On what is and isn’t included
The $12,500–$26,400 band covers tear-off, underlayment, the new covering, disposal, and labor on a 2,000–2,500 sq ft footprint. It excludes deck replacement — on a Binghamton roof at this price, budget a further $750–$3,168 if the sheathing is soft.
Installed cost divided by service life, using Binghamton’s own figures. Impact-Resistant Class 4 works out cheapest per year at about $679 — even though it is not the cheapest to buy. The bar shows best case to worst case; the dot is the midpoint. All of it assumes the roof reaches its rated life, which depends on the installation more than the product.
Each tick is one of the 935 cities researched on the same basis. Binghamton sits at the 93th percentile.
What moves the number in Binghamton
The $12,500–$26,400 band above assumes a straightforward roof. These are the items that move a Binghamton quote off it, priced against that same range rather than a national percentage.
| Cost driver | Effect | Why it costs what it does |
|---|---|---|
| Steep pitch (7:12 and above) | +$2,140–$3,696 | Staging, slower coursing, and fall-protection time. On a $19,450 Binghamton roof that is the largest single geometry premium. |
| Removing a second layer | +$1,125–$4,224 | Tear-off and disposal roughly double. Ask whether the $12,500–$26,400 quoted assumed one layer. |
| Sheathing replacement | +$750–$3,168 | The most common change order, priced per sheet once the deck is open. At $19,450 for the roof itself, an undisclosed sheet rate is where a Binghamton quote quietly grows. |
| Two-story access | +$1,167–$1,945 | Longer material handling on every course, worth roughly $1,556 on this range. |
| Class 4 impact-resistant upgrade | +$2,300–$6,300 | Taken from the Binghamton table above. Whether a carrier credit offsets that $2,300 depends on your own policy — price it, do not assume it. |
| Standing seam metal instead of asphalt | +$6,900–$22,700 | Roughly double the service life, so the comparison is $720 a year against $527 a year, not the sticker price. |
| Extended ice-and-water membrane | +$375–$1,584 | Carrying the membrane past code minimum, which 83 in of annual snow and 137 freezing days argue for here. |
What the weather does to roofs in Binghamton
Across the 1991-2020 climate normals, Binghamton averages summer highs averaging 76°F, 39 in of precipitation a year, and 83 in of snow — the loads a replacement here is bought to survive.
The dominant stressor is snow load and ice damming. Binghamton’s 83 in of annual snowfall sits in the 99th percentile among the 1,037 cities covered here. With 137 days a year reaching freezing, that snow does not leave in a single thaw. It melts against the warm deck and refreezes at the cold eave, backing water up under the shingle course. Ice-and-water membrane carried above the exterior wall line — not merely to the fascia — is the detail that decides whether a Binghamton roof leaks at the wall plate.
137 days a year dropping to freezing compounds it — in the 85th percentile among the same set. 137 crossings of 32°F a year work moisture into every nail hole and flashing lap, then expand it. Sealant-dependent repairs are the first thing to go, which is why flashing in Binghamton is better replaced than re-caulked when a roof is opened up.
Source: NOAA 1991-2020 U.S. Climate Normals, nearest reporting station (8 mi from Binghamton). Percentiles are measured against the 1,037 cities in this guide.
Permits and code in Binghamton
Permits and code
Reroof permits in Binghamton are issued by City of Binghamton Building Department, and permit plus inspection fees typically land in the $180–$650 band.
Roofing work is generally administered under state-adopted residential code frameworks with local snow/ice and drainage amendments.
Confirm in writing that City of Binghamton Building Department is pulling the permit and that the fee is inside the quote — an unpermitted roof surfaces later, at a sale or a claim.
What matters at inspection here
Driven by Binghamton’s measured climate
- Ice barrier depth at the eave. With 83 in of snow and 137 freezing days, the code minimum is measured from the exterior wall line rather than the fascia — on a deep overhang that means a second course.
- Valley and penetration detailing. 39 in a year across 6 heavy days finds every lap detailed against the slope. Name valley metal width and pipe-boot type in the scope.
- Install temperature. Binghamton winter lows average 18°F, and asphalt will not seal below roughly 40°F. Ask when the crew plans to start and whether they hand-seal.
Where this guide covers in Binghamton
ZIP codes
Binghamton spans Broome County, and this guide covers the 5 ZIP codes carrying a Binghamton mailing address.
- 13901
- 13902
- 13903
- 13904
- 13905
Closest cities in this guide
Straight-line distance from Binghamton, nearest first.
Binghamton roofing questions
How much does a new roof cost in Binghamton, NY?
Architectural asphalt shingles on a 2,000–2,500 sq ft home in Binghamton run $12,500–$26,400 installed, or about $496–$1,048 per roofing square. Three-tab shingles start lower at $9,900 - $22,200. Premium assemblies reach $19,400 - $49,100. The midpoint is 14% above the median across the 935 cities researched on the same basis.
What wears out roofs fastest in Binghamton?
Snow load and ice damming. Binghamton records 83 in of snow a year, which is the 99th percentile among the 1,037 cities covered here. With 137 days a year reaching freezing, that snow does not leave in a single thaw. It melts against the warm deck and refreezes at the cold eave, backing water up under the shingle course. Ice-and-water membrane carried above the exterior wall line — not merely to the fascia — is the detail that decides whether a Binghamton roof leaks at the wall plate.
Do I need a permit to replace a roof in Binghamton?
Most full tear-offs require a permit and at least one inspection, handled by City of Binghamton Building Department. Budget $180–$650 for permit and inspection fees. Get it in writing that the permit is pulled and the fee sits inside the quote; in Binghamton an unpermitted roof tends to surface at a sale or a claim, years later.
Does this guide cover areas near Binghamton?
Yes — the closest are Scranton (49 mi), Wilkes-Barre (59 mi), and Syracuse (67 mi), each researched separately. Comparing them is worth a minute: a contractor working out of Scranton will quote Binghamton too, and the two markets do not always price the same.
Compare three local quotes
The ranges on this page are for planning. The only way to know your number is a measured scope from a contractor who has been on the roof. We will pass your details to vetted local companies — no cost, no obligation.