Roofing in Revere, MA
An independent look at what a replacement really costs ($12K–$26K), which weather loads drive wear here, and how the local permit process works — built from 1991-2020 climate records and Massachusetts code requirements, with no contractor paying to appear.
Suffolk County, Massachusetts. Planning figures — not a quote.
What a roof costs in Revere
A full tear-off and replacement in Revere runs $12,300–$25,900 for architectural asphalt shingles on a 2,000–2,500 sq ft home. Such a footprint carries roughly 22–28 squares of actual roof surface once pitch and waste are counted, which puts the same job at about $488–$1,028 per square — the unit a contractor's estimate will be built in.
That midpoint sits 12% above the $17,100 median across the 935 cities researched on this basis, placing Revere in the 88th percentile for asphalt replacement cost.
| Material | Installed range | Service life | Best suited to |
|---|---|---|---|
| 3-Tab Shingles | $9,700 – $21,800 | 15–22 years | Lowest upfront cost for straightforward rooflines and short hold periods. |
| Architectural Shingles | $12,300 – $25,900 | 24–32 years | Most common replacement baseline balancing performance and budget. |
| Impact-Resistant Class 4 | $14,500 – $32,200 | 30–40 years | Storm and hail resilience with potential insurance value in many counties. |
| Exposed-Fastener Metal | $16,500 – $41,000 | 30–45 years | Durability-forward option for lower maintenance in wind-prone markets. |
| Standing Seam Metal | $19,100 – $48,200 | 40–60 years | High-performance option for wind-driven rain and long lifecycle value. |
| Premium Synthetic/Slate | $23,400 – $61,000 | 45–80 years | Premium homes and historic-style architecture seeking long service life. |
On what is and isn’t included
The $12,300–$25,900 band covers tear-off, underlayment, the new covering, disposal, and labor on a 2,000–2,500 sq ft footprint. It excludes deck replacement — on a Revere roof at this price, budget a further $738–$3,108 if the sheathing is soft.
Installed cost divided by service life, using Revere’s own figures. Impact-Resistant Class 4 works out cheapest per year at about $667 — even though it is not the cheapest to buy. The bar shows best case to worst case; the dot is the midpoint. All of it assumes the roof reaches its rated life, which depends on the installation more than the product.
Each tick is one of the 935 cities researched on the same basis. Revere sits at the 88th percentile.
What moves the number in Revere
The $12,300–$25,900 band above assumes a straightforward roof. These are the items that move a Revere quote off it, priced against that same range rather than a national percentage.
| Cost driver | Effect | Why it costs what it does |
|---|---|---|
| Steep pitch (7:12 and above) | +$2,101–$3,629 | Staging, slower coursing, and fall-protection time. On a $19,100 Revere roof that is the largest single geometry premium. |
| Removing a second layer | +$1,107–$4,144 | Tear-off and disposal roughly double. Ask whether the $12,300–$25,900 quoted assumed one layer. |
| Sheathing replacement | +$738–$3,108 | The most common change order, priced per sheet once the deck is open. At $19,100 for the roof itself, an undisclosed sheet rate is where a Revere quote quietly grows. |
| Two-story access | +$1,146–$1,910 | Longer material handling on every course, worth roughly $1,528 on this range. |
| Class 4 impact-resistant upgrade | +$2,200–$6,300 | Taken from the Revere table above. Whether a carrier credit offsets that $2,200 depends on your own policy — price it, do not assume it. |
| Standing seam metal instead of asphalt | +$6,800–$22,300 | Roughly double the service life, so the comparison is $707 a year against $518 a year, not the sticker price. |
| Extended ice-and-water membrane | +$369–$1,554 | Carrying the membrane past code minimum, which 44 in of annual snow and 92 freezing days argue for here. |
What the weather does to roofs in Revere
Across the 1991-2020 climate normals, Revere averages summer highs averaging 79°F, 44 in of precipitation a year, and 44 in of snow — the loads a replacement here is bought to survive.
The dominant stressor is snow load and ice damming. Revere’s 44 in of annual snowfall sits in the 87th percentile among the 1,037 cities covered here. 44 in falls but only 92 days a year reach freezing, so it arrives and leaves rather than sitting. The risk is less a season-long ice dam than repeated loading and shedding, which works fasteners loose and finds any valley or penetration that was detailed short.
Source: NOAA 1991-2020 U.S. Climate Normals, nearest reporting station (3 mi from Revere). Percentiles are measured against the 1,037 cities in this guide.
Permits and code in Revere
Permits and code
Reroof permits in Revere are issued by City of Revere Building Department, and permit plus inspection fees typically land in the $180–$650 band.
Roofing work is generally administered under state-adopted residential code frameworks with local snow/ice and drainage amendments.
Confirm in writing that City of Revere Building Department is pulling the permit and that the fee is inside the quote — an unpermitted roof surfaces later, at a sale or a claim.
What matters at inspection here
Driven by Revere’s measured climate
- Ice barrier depth at the eave. With 44 in of snow and 92 freezing days, the code minimum is measured from the exterior wall line rather than the fascia — on a deep overhang that means a second course.
- Valley and penetration detailing. 44 in a year across 10 heavy days finds every lap detailed against the slope. Name valley metal width and pipe-boot type in the scope.
Where this guide covers in Revere
ZIP codes
Revere spans Suffolk County, and this guide covers the 1 ZIP code carrying a Revere mailing address.
- 2151
Closest cities in this guide
Straight-line distance from Revere, nearest first.
Revere roofing questions
How much does a new roof cost in Revere, MA?
Architectural asphalt shingles on a 2,000–2,500 sq ft home in Revere run $12,300–$25,900 installed, or about $488–$1,028 per roofing square. Three-tab shingles start lower at $9,700 - $21,800. Premium assemblies reach $19,100 - $48,200. The midpoint is 12% above the median across the 935 cities researched on the same basis.
What wears out roofs fastest in Revere?
Snow load and ice damming. Revere records 44 in of snow a year, which is the 87th percentile among the 1,037 cities covered here. 44 in falls but only 92 days a year reach freezing, so it arrives and leaves rather than sitting. The risk is less a season-long ice dam than repeated loading and shedding, which works fasteners loose and finds any valley or penetration that was detailed short.
Do I need a permit to replace a roof in Revere?
Most full tear-offs require a permit and at least one inspection, handled by City of Revere Building Department. Budget $180–$650 for permit and inspection fees. Get it in writing that the permit is pulled and the fee sits inside the quote; in Revere an unpermitted roof tends to surface at a sale or a claim, years later.
Does this guide cover areas near Revere?
Yes — the closest are Chelsea (2 mi), Everett (2 mi), and Malden (3 mi), each researched separately. Comparing them is worth a minute: a contractor working out of Chelsea will quote Revere too, and the two markets do not always price the same.
Compare three local quotes
The ranges on this page are for planning. The only way to know your number is a measured scope from a contractor who has been on the roof. We will pass your details to vetted local companies — no cost, no obligation.