Roofing in Dothan, AL

An independent look at what a replacement really costs ($10K–$22K), which weather loads drive wear here, and how the local permit process works — built from 1991-2020 climate records and Alabama code requirements, with no contractor paying to appear.

Dothan at a glance AL·2026
Replacement range $10K–$22Karchitectural shingles, 2,000–2,500 sq ft
Cost per square $405–$85322–28 squares of roof area
Climate load 91°F summer avg56 in rain
Permit + inspection $180–$650City of Dothan Building Department

Houston County, Alabama. Planning figures — not a quote.

Coastal homes near the Gulf

What a roof costs in Dothan

A full tear-off and replacement in Dothan runs $10,200–$21,500 for architectural asphalt shingles on a 2,000–2,500 sq ft home. Such a footprint carries roughly 22–28 squares of actual roof surface once pitch and waste are counted, which puts the same job at about $405–$853 per square — the unit a contractor's estimate will be built in.

That midpoint lands within 7% of the $17,100 median across the 935 cities researched on this basis — Dothan is a middle-of-the-market asphalt roof.

Installed cost by roof covering — Dothan, AL, 2026
MaterialInstalled range Service lifeBest suited to
3-Tab Shingles $8,100 – $18,000 15–22 years Lowest upfront cost for straightforward rooflines and short hold periods.
Architectural Shingles $10,200 – $21,500 24–32 years Most common replacement baseline balancing performance and budget.
Impact-Resistant Class 4 $12,000 – $26,600 30–40 years Storm and hail resilience with potential insurance value in many counties.
Exposed-Fastener Metal $13,700 – $33,900 30–45 years Durability-forward option for lower maintenance in wind-prone markets.
Standing Seam Metal $15,800 – $40,000 40–60 years High-performance option for wind-driven rain and long lifecycle value.
Premium Synthetic/Slate $19,400 – $50,500 45–80 years Premium homes and historic-style architecture seeking long service life.

On what is and isn’t included

The $10,200–$21,500 band covers tear-off, underlayment, the new covering, disposal, and labor on a 2,000–2,500 sq ft footprint. It excludes deck replacement — on a Dothan roof at this price, budget a further $612–$2,580 if the sheathing is soft.

What each roof costs per year in Dothan
$242 $721 $1,200 Impact-Resistant Class 4 $551 30–40 yr Standing Seam Metal $558 40–60 yr Premium Synthetic/Slate $559 45–80 yr Architectural Shingles $566 24–32 yr Exposed-Fastener Metal $635 30–45 yr 3-Tab Shingles $705 15–22 yr

Installed cost divided by service life, using Dothan’s own figures. Impact-Resistant Class 4 works out cheapest per year at about $551 — even though it is not the cheapest to buy. The bar shows best case to worst case; the dot is the midpoint. All of it assumes the roof reaches its rated life, which depends on the installation more than the product.

Where Dothan sits on price
median $17,100 Dothan $15,850 $11,900 $22,050

Each tick is one of the 935 cities researched on the same basis. Dothan sits at the 19th percentile.

What moves the number in Dothan

The $10,200–$21,500 band above assumes a straightforward roof. These are the items that move a Dothan quote off it, priced against that same range rather than a national percentage.

Adjustments to the Dothan replacement range
Cost driverEffect Why it costs what it does
Steep pitch (7:12 and above) +$1,744–$3,012 Staging, slower coursing, and fall-protection time. On a $15,850 Dothan roof that is the largest single geometry premium.
Removing a second layer +$918–$3,440 Tear-off and disposal roughly double. Ask whether the $10,200–$21,500 quoted assumed one layer.
Sheathing replacement +$612–$2,580 The most common change order, priced per sheet once the deck is open. At $15,850 for the roof itself, an undisclosed sheet rate is where a Dothan quote quietly grows.
Two-story access +$951–$1,585 Longer material handling on every course, worth roughly $1,268 on this range.
Class 4 impact-resistant upgrade +$1,800–$5,100 Taken from the Dothan table above. Whether a carrier credit offsets that $1,800 depends on your own policy — price it, do not assume it.
Standing seam metal instead of asphalt +$5,600–$18,500 Roughly double the service life, so the comparison is $587 a year against $429 a year, not the sticker price.

What the weather does to roofs in Dothan

Across the 1991-2020 climate normals, Dothan averages summer highs averaging 91°F, 56 in of precipitation a year, and 73 days a year above 90°F — the loads a replacement here is bought to survive.

The dominant stressor is sustained moisture load. Dothan’s 56 in of annual precipitation sits in the 94th percentile among the 1,037 cities covered here. 56 in a year arriving across roughly 16 days of 1 in-plus rainfall means volume and intensity both. Water finds any lap detailed against the slope, so underlayment coverage, valley metal width, and pipe-boot type matter more in Dothan than in a market where the same total arrives gently.

16 days a year of 1 in-plus rainfall compounds it — in the 88th percentile among the same set. 16 days a year drop an inch or more, and 34 drop at least half an inch. Those are the days that overwhelm an undersized valley or gutter and push water sideways under the course above. Drainage capacity belongs in the Dothan scope conversation, not just shingle grade.

91°F
Avg summer high
56 in
Annual precipitation
73
Days/yr 90°F+
16
Days/yr 1 in+ rain
Open roof valley lined with metal, shingles cut back on both sides
An open valley leaves the metal channel exposed to carry water. Valleys handle more water than any other part of the roof, which is why the detailing there matters most.

Source: NOAA 1991-2020 U.S. Climate Normals, nearest reporting station (11 mi from Dothan). Percentiles are measured against the 1,037 cities in this guide.

Permits and code in Dothan

Permits and code

Reroof permits in Dothan are issued by City of Dothan Building Department, and permit plus inspection fees typically land in the $180–$650 band.

Roofing work is generally administered under state-adopted residential code frameworks with local storm, moisture, and wind amendments.

Confirm in writing that City of Dothan Building Department is pulling the permit and that the fee is inside the quote — an unpermitted roof surfaces later, at a sale or a claim.

What matters at inspection here

Driven by Dothan’s measured climate

  • Valley and penetration detailing. 56 in a year across 16 heavy days finds every lap detailed against the slope. Name valley metal width and pipe-boot type in the scope.
  • Deck condition and fastener holding. With no single climate hazard dominating in Dothan, sheathing that will not hold a nail is the most likely reason a scope changes mid-job.

Where this guide covers in Dothan

ZIP codes

Dothan spans Houston County, and this guide covers the 5 ZIP codes carrying a Dothan mailing address.

  • 36301
  • 36302
  • 36303
  • 36304
  • 36305

Dothan roofing questions

How much does a new roof cost in Dothan, AL?

Architectural asphalt shingles on a 2,000–2,500 sq ft home in Dothan run $10,200–$21,500 installed, or about $405–$853 per roofing square. Three-tab shingles start lower at $8,100 - $18,000. Premium assemblies reach $15,800 - $40,000. The midpoint is 7% below the median across the 935 cities researched on the same basis.

What wears out roofs fastest in Dothan?

Sustained moisture load. Dothan records 56 in of precipitation a year, which is the 94th percentile among the 1,037 cities covered here. 56 in a year arriving across roughly 16 days of 1 in-plus rainfall means volume and intensity both. Water finds any lap detailed against the slope, so underlayment coverage, valley metal width, and pipe-boot type matter more in Dothan than in a market where the same total arrives gently.

Do I need a permit to replace a roof in Dothan?

Most full tear-offs require a permit and at least one inspection, handled by City of Dothan Building Department. Budget $180–$650 for permit and inspection fees. Get it in writing that the permit is pulled and the fee sits inside the quote; in Dothan an unpermitted roof tends to surface at a sale or a claim, years later.

Does this guide cover areas near Dothan?

Yes — the closest are Panama City (75 mi), Albany (77 mi), and Tallahassee (85 mi), each researched separately. Comparing them is worth a minute: a contractor working out of Panama City will quote Dothan too, and the two markets do not always price the same.

Compare three local quotes

The ranges on this page are for planning. The only way to know your number is a measured scope from a contractor who has been on the roof. We will pass your details to vetted local companies — no cost, no obligation.